.gitignore

@@ -3,10 +3,6 @@ skyview
 build/
 dist/
 
-# Debian package build artifacts
-debian/usr/bin/skyview
-debian/usr/bin/beast-dump
-
 # Configuration
 config.json
 

Makefile

@@ -1,26 +1,13 @@
-PACKAGE_NAME=skyview
+BINARY_NAME=skyview
 BUILD_DIR=build
 VERSION=$(shell git describe --tags --always --dirty 2>/dev/null || echo "dev")
-LDFLAGS=-w -s -X main.version=$(VERSION)
 
-.PHONY: build build-all clean run dev test lint deb deb-clean install-deps
+.PHONY: build clean run dev test lint deb deb-clean install-deps
 
-# Build main skyview binary
 build:
-	@echo "Building skyview..."
+	@echo "Building $(BINARY_NAME)..."
 	@mkdir -p $(BUILD_DIR)
-	go build -ldflags="$(LDFLAGS)" -o $(BUILD_DIR)/skyview ./cmd/skyview
+	go build -ldflags="-w -s -X main.version=$(VERSION)" -o $(BUILD_DIR)/$(BINARY_NAME) ./cmd/skyview
-
-# Build beast-dump utility binary
-build-beast-dump:
-	@echo "Building beast-dump..."
-	@mkdir -p $(BUILD_DIR)
-	go build -ldflags="$(LDFLAGS)" -o $(BUILD_DIR)/beast-dump ./cmd/beast-dump
-
-# Build all binaries
-build-all: build build-beast-dump
-	@echo "Built all binaries successfully:"
-	@ls -la $(BUILD_DIR)/
 
 clean:
 	@echo "Cleaning..."

README.md

@@ -17,14 +17,13 @@ A high-performance, multi-source ADS-B aircraft tracking application that connec
 - **Multi-view Dashboard**: Map, Table, Statistics, Coverage, and 3D Radar views
 
 ### Professional Visualization
-- **Signal Analysis**: Signal strength visualization and coverage analysis
+- **Signal Analysis**: Signal strength heatmaps and coverage analysis
 - **Range Circles**: Configurable range rings for each receiver
 - **Flight Trails**: Historical aircraft movement tracking  
-- **3D Radar View**: Three.js-powered 3D visualization 
+- **3D Radar View**: Three.js-powered 3D visualization (optional)
-- **Statistics Dashboard**: Aircraft count timeline *(additional charts under construction)* 🚧
+- **Statistics Dashboard**: Live charts and metrics
 - **Smart Origin**: Auto-calculated map center based on receiver locations
 - **Map Controls**: Center on aircraft, reset to origin, toggle overlays
-- **Signal Heatmaps**: Coverage heatmap visualization *(under construction)* 🚧
 
 ### Aircraft Data
 - **Complete Mode S Decoding**: Position, velocity, altitude, heading
@@ -52,7 +51,7 @@ A high-performance, multi-source ADS-B aircraft tracking application that connec
 
 ```bash
 # Install
-sudo dpkg -i skyview_0.0.2_amd64.deb
+sudo dpkg -i skyview_2.0.0_amd64.deb
 
 # Configure 
 sudo nano /etc/skyview/config.json
@@ -120,18 +119,9 @@ Access the web interface at `http://localhost:8080`
 ### Views Available:
 - **Map View**: Interactive aircraft tracking with receiver locations
 - **Table View**: Sortable aircraft data with multi-source information  
-- **Statistics**: Aircraft count timeline *(additional charts planned)* 🚧
+- **Statistics**: Live metrics and historical charts
-- **Coverage**: Signal strength analysis *(heatmaps under construction)* 🚧
+- **Coverage**: Signal strength analysis and heatmaps
-- **3D Radar**: Three-dimensional aircraft visualization *(controls under construction)* 🚧
+- **3D Radar**: Three-dimensional aircraft visualization
-
-### 🚧 Features Under Construction
-Some advanced features are currently in development:
-- **Message Rate Charts**: Per-source message rate visualization
-- **Signal Strength Distribution**: Signal strength histogram analysis  
-- **Altitude Distribution**: Aircraft altitude distribution charts
-- **Interactive Heatmaps**: Leaflet.heat-based coverage heatmaps
-- **3D Radar Controls**: Interactive 3D view manipulation (reset, auto-rotate, range)
-- **Enhanced Error Notifications**: User-friendly toast notifications for issues
 
 ## 🔧 Building
 
@@ -203,7 +193,7 @@ make check          # Run all checks
 ### Systemd Service (Debian/Ubuntu)
 ```bash
 # Install package
-sudo dpkg -i skyview_0.0.2_amd64.deb
+sudo dpkg -i skyview_2.0.0_amd64.deb
 
 # Configure sources in /etc/skyview/config.json
 # Start service
@@ -259,9 +249,9 @@ MIT License - see [LICENSE](LICENSE) file for details.
 
 ## 🆘 Support
 
-- [Issues](https://kode.naiv.no/olemd/skyview/issues)
+- [GitHub Issues](https://github.com/skyview/skyview/issues)
-- [Documentation](https://kode.naiv.no/olemd/skyview/wiki)
+- [Documentation](https://github.com/skyview/skyview/wiki)
-- [Configuration Examples](https://kode.naiv.no/olemd/skyview/src/branch/main/examples)
+- [Configuration Examples](https://github.com/skyview/skyview/tree/main/examples)
 
 ---
 

assets/assets.go

@@ -6,7 +6,7 @@
 //   - index.html: Main web interface with aircraft tracking map
 //   - css/style.css: Styling for the web interface
 //   - js/app.js: JavaScript client for WebSocket communication and map rendering
-//   - icons/*.svg: Type-specific SVG icons for aircraft markers
+//   - aircraft-icon.svg: SVG icon for aircraft markers
 //   - favicon.ico: Browser icon
 //
 // The embedded filesystem is used by the HTTP server to serve static content

assets/static/aircraft-icon.svg

@@ -0,0 +1,5 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24" fill="#00a8ff" stroke="#ffffff" stroke-width="1">
+  <path d="M12 2l-2 16 2-2 2 2-2-16z"/>
+  <path d="M4 10l8-2-1 2-7 0z"/>
+  <path d="M20 10l-8-2 1 2 7 0z"/>
+</svg>

assets/static/css/style.css

@@ -195,8 +195,8 @@ body {
 
 .display-options {
     position: absolute;
-    top: 320px;
+    top: 10px;
-    right: 10px;
+    left: 10px;
     z-index: 1000;
     background: rgba(45, 45, 45, 0.95);
     border: 1px solid #404040;
@@ -417,115 +417,6 @@ body {
     color: #ffffff !important;
 }
 
-/* Under Construction Styles */
-.under-construction {
-    color: #ff8c00;
-    font-size: 0.8em;
-    font-weight: normal;
-    margin-left: 8px;
-}
-
-.construction-notice {
-    background: rgba(255, 140, 0, 0.1);
-    border: 1px solid #ff8c00;
-    border-radius: 4px;
-    padding: 8px;
-    margin: 8px 0;
-    font-size: 0.9em;
-    color: #ff8c00;
-    text-align: center;
-}
-
-/* Toast Notifications */
-.toast-notification {
-    position: fixed;
-    top: 20px;
-    right: 20px;
-    background: rgba(40, 40, 40, 0.95);
-    border: 1px solid #555;
-    border-radius: 6px;
-    padding: 12px 20px;
-    color: #ffffff;
-    font-size: 0.9em;
-    max-width: 300px;
-    z-index: 10000;
-    transform: translateX(320px);
-    transition: transform 0.3s ease-in-out;
-    box-shadow: 0 4px 12px rgba(0, 0, 0, 0.3);
-}
-
-.toast-notification.error {
-    border-color: #ff8c00;
-    background: rgba(255, 140, 0, 0.1);
-    color: #ff8c00;
-}
-
-.toast-notification.show {
-    transform: translateX(0);
-}
-
-/* Version Info */
-.version-info {
-    font-size: 0.6em;
-    color: #888;
-    font-weight: normal;
-    margin-left: 8px;
-}
-
-/* Repository Link */
-.repo-link {
-    color: #888;
-    text-decoration: none;
-    font-size: 0.7em;
-    margin-left: 6px;
-    opacity: 0.6;
-    transition: opacity 0.2s ease, color 0.2s ease;
-}
-
-.repo-link:hover {
-    color: #4a9eff;
-    opacity: 1;
-    text-decoration: none;
-}
-
-/* Collapsible Sections */
-.collapsible-header {
-    cursor: pointer;
-    user-select: none;
-    display: flex;
-    justify-content: space-between;
-    align-items: center;
-    margin: 0 0 8px 0;
-    padding: 4px 0;
-    border-bottom: 1px solid #444;
-}
-
-.collapsible-header:hover {
-    color: #4a9eff;
-}
-
-.collapse-indicator {
-    font-size: 0.8em;
-    transition: transform 0.2s ease;
-    color: #888;
-}
-
-.collapsible-header.collapsed .collapse-indicator {
-    transform: rotate(-90deg);
-}
-
-.collapsible-content {
-    overflow: hidden;
-    transition: max-height 0.3s ease;
-    max-height: 200px;
-}
-
-.collapsible-content.collapsed {
-    max-height: 0;
-    margin: 0;
-    padding: 0;
-}
-
 .leaflet-popup-tip {
     background: #2d2d2d !important;
 }

assets/static/index.html

@@ -28,7 +28,7 @@
 <body>
     <div id="app">
         <header class="header">
-            <h1>SkyView <span class="version-info">v0.0.2</span> <a href="https://kode.naiv.no/olemd/skyview" target="_blank" class="repo-link" title="Project Repository">⚙</a></h1>
+            <h1>SkyView</h1>
             
             <!-- Status indicators -->
             <div class="status-section">
@@ -81,13 +81,10 @@
                     <button id="toggle-dark-mode" title="Toggle dark/light mode">🌙 Night Mode</button>
                 </div>
                 
-                <!-- Options -->
+                <!-- Display options -->
                 <div class="display-options">
-                    <h4 class="collapsible-header collapsed" id="display-options-header">
+                    <h4>Display Options</h4>
-                        <span>Options</span>
+                    <div class="option-group">
-                        <span class="collapse-indicator">▼</span>
-                    </h4>
-                    <div class="option-group collapsible-content collapsed" id="display-options-content">
                         <label>
                             <input type="checkbox" id="show-site-positions" checked>
                             <span>Site Positions</span>
@@ -208,19 +205,16 @@
                         <canvas id="aircraft-chart"></canvas>
                     </div>
                     <div class="chart-card">
-                        <h3>Message Rate by Source <span class="under-construction">🚧 Under Construction</span></h3>
+                        <h3>Message Rate by Source</h3>
                         <canvas id="message-chart"></canvas>
-                        <div class="construction-notice">This chart is planned but not yet implemented</div>
                     </div>
                     <div class="chart-card">
-                        <h3>Signal Strength Distribution <span class="under-construction">🚧 Under Construction</span></h3>
+                        <h3>Signal Strength Distribution</h3>
                         <canvas id="signal-chart"></canvas>
-                        <div class="construction-notice">This chart is planned but not yet implemented</div>
                     </div>
                     <div class="chart-card">
-                        <h3>Altitude Distribution <span class="under-construction">🚧 Under Construction</span></h3>
+                        <h3>Altitude Distribution</h3>
                         <canvas id="altitude-chart"></canvas>
-                        <div class="construction-notice">This chart is planned but not yet implemented</div>
                     </div>
                 </div>
             </div>
@@ -239,11 +233,10 @@
             <!-- 3D Radar View -->
             <div id="radar3d-view" class="view">
                 <div class="radar3d-controls">
-                    <div class="construction-notice">🚧 3D Controls Under Construction</div>
+                    <button id="radar3d-reset">Reset View</button>
-                    <button id="radar3d-reset" disabled>Reset View</button>
+                    <button id="radar3d-auto-rotate">Auto Rotate</button>
-                    <button id="radar3d-auto-rotate" disabled>Auto Rotate</button>
                     <label>
-                        <input type="range" id="radar3d-range" min="10" max="500" value="100" disabled>
+                        <input type="range" id="radar3d-range" min="10" max="500" value="100">
                         Range: <span id="radar3d-range-value">100</span> km
                     </label>
                 </div>

assets/static/js/app.js

@@ -107,9 +107,6 @@ class SkyView {
             });
         }
         
-        // Setup collapsible sections
-        this.setupCollapsibleSections();
-        
         const toggleDarkModeBtn = document.getElementById('toggle-dark-mode');
         if (toggleDarkModeBtn) {
             toggleDarkModeBtn.addEventListener('click', () => {
@@ -461,43 +458,6 @@ class SkyView {
             // Clean up old trail data, etc.
         }, 30000);
     }
-    
-    setupCollapsibleSections() {
-        // Setup Display Options collapsible
-        const displayHeader = document.getElementById('display-options-header');
-        const displayContent = document.getElementById('display-options-content');
-        
-        if (displayHeader && displayContent) {
-            displayHeader.addEventListener('click', () => {
-                const isCollapsed = displayContent.classList.contains('collapsed');
-                
-                if (isCollapsed) {
-                    // Expand
-                    displayContent.classList.remove('collapsed');
-                    displayHeader.classList.remove('collapsed');
-                } else {
-                    // Collapse
-                    displayContent.classList.add('collapsed');
-                    displayHeader.classList.add('collapsed');
-                }
-                
-                // Save state to localStorage
-                localStorage.setItem('displayOptionsCollapsed', !isCollapsed);
-            });
-            
-            // Restore saved state (default to collapsed)
-            const savedState = localStorage.getItem('displayOptionsCollapsed');
-            const shouldCollapse = savedState === null ? true : savedState === 'true';
-            
-            if (shouldCollapse) {
-                displayContent.classList.add('collapsed');
-                displayHeader.classList.add('collapsed');
-            } else {
-                displayContent.classList.remove('collapsed');
-                displayHeader.classList.remove('collapsed');
-            }
-        }
-    }
 }
 
 // Initialize application when DOM is ready

assets/static/js/modules/aircraft-manager.js

@@ -362,14 +362,6 @@ export class AircraftManager {
                     <div class="detail-row">
                         <strong>Type:</strong> ${type}
                     </div>
-                    ${aircraft.TransponderCapability ? `
-                    <div class="detail-row">
-                        <strong>Transponder:</strong> ${aircraft.TransponderCapability}
-                    </div>` : ''}
-                    ${aircraft.SignalQuality ? `
-                    <div class="detail-row">
-                        <strong>Signal Quality:</strong> ${aircraft.SignalQuality}
-                    </div>` : ''}
                     
                     <div class="detail-grid">
                         <div class="detail-item">

assets/static/js/modules/map-manager.js

@@ -352,14 +352,8 @@ export class MapManager {
     }
 
     createHeatmapOverlay(data) {
-        // 🚧 Under Construction: Heatmap visualization not yet implemented
+        // Simplified heatmap implementation
-        // Planned: Use Leaflet.heat library for proper heatmap rendering
+        // In production, would use proper heatmap library like Leaflet.heat
-        console.log('Heatmap overlay requested but not yet implemented');
-        
-        // Show user-visible notice
-        if (window.uiManager) {
-            window.uiManager.showError('Heatmap visualization is under construction 🚧');
-        }
     }
 
     setSelectedSource(sourceId) {

assets/static/js/modules/ui-manager.js

@@ -316,22 +316,6 @@ export class UIManager {
 
     showError(message) {
         console.error(message);
-        
+        // Could implement toast notifications here
-        // Simple toast notification implementation
-        const toast = document.createElement('div');
-        toast.className = 'toast-notification error';
-        toast.textContent = message;
-        
-        // Add to page
-        document.body.appendChild(toast);
-        
-        // Show toast with animation
-        setTimeout(() => toast.classList.add('show'), 100);
-        
-        // Auto-remove after 5 seconds
-        setTimeout(() => {
-            toast.classList.remove('show');
-            setTimeout(() => document.body.removeChild(toast), 300);
-        }, 5000);
     }
 }

cmd/beast-dump/main.go

@@ -5,13 +5,11 @@
 // in human-readable format on the console.
 //
 // Usage:
-//
 //   beast-dump -tcp host:port          # Read from TCP socket
 //   beast-dump -file path/to/file      # Read from file
 //   beast-dump -verbose               # Show detailed message parsing
 //
 // Examples:
-//
 //   beast-dump -tcp svovel:30005      # Connect to dump1090 Beast stream
 //   beast-dump -file beast.test       # Parse Beast data from file
 //   beast-dump -tcp localhost:30005 -verbose  # Verbose TCP parsing

config.json.example

@@ -0,0 +1,15 @@
+{
+  "server": {
+    "address": ":8080",
+    "port": 8080
+  },
+  "dump1090": {
+    "host": "192.168.1.100",
+    "data_port": 30003
+  },
+  "origin": {
+    "latitude": 37.7749,
+    "longitude": -122.4194,
+    "name": "San Francisco"
+  }
+}

debian/DEBIAN/control

@@ -1,10 +1,10 @@
 Package: skyview
-Version: 0.0.2
+Version: 2.0.0
 Section: net
 Priority: optional
 Architecture: amd64
 Depends: systemd
-Maintainer: Ole-Morten Duesund <glemt.net>
+Maintainer: SkyView Team <admin@skyview.local>
 Description: Multi-source ADS-B aircraft tracker with Beast format support
  SkyView is a standalone application that connects to multiple dump1090 Beast
  format TCP streams and provides a modern web frontend for aircraft tracking.
@@ -20,4 +20,4 @@ Description: Multi-source ADS-B aircraft tracker with Beast format support
   - Mobile-responsive design
   - Systemd integration for service management
   - Beast-dump utility for raw ADS-B data analysis
-Homepage: https://kode.naiv.no/olemd/skyview
+Homepage: https://github.com/skyview/skyview

debian/DEBIAN/postinst

@@ -5,34 +5,35 @@ case "$1" in
     configure)
         # Create skyview user and group if they don't exist
         if ! getent group skyview >/dev/null 2>&1; then
-            addgroup --system --quiet skyview
+            addgroup --system skyview
         fi
         
         if ! getent passwd skyview >/dev/null 2>&1; then
             adduser --system --ingroup skyview --home /var/lib/skyview \
-                    --no-create-home --disabled-password --quiet skyview
+                    --no-create-home --disabled-password skyview
         fi
         
         # Create directories with proper permissions
-        mkdir -p /var/lib/skyview /var/log/skyview >/dev/null 2>&1 || true
+        mkdir -p /var/lib/skyview
-        chown skyview:skyview /var/lib/skyview /var/log/skyview >/dev/null 2>&1 || true
+        mkdir -p /var/log/skyview
-        chmod 755 /var/lib/skyview /var/log/skyview >/dev/null 2>&1 || true
+        chown skyview:skyview /var/lib/skyview
+        chown skyview:skyview /var/log/skyview
+        chmod 755 /var/lib/skyview
+        chmod 755 /var/log/skyview
         
-        # Set permissions on config files
+        # Set permissions on config file
         if [ -f /etc/skyview/config.json ]; then
-            chown root:skyview /etc/skyview/config.json >/dev/null 2>&1 || true
+            chown root:skyview /etc/skyview/config.json
-            chmod 640 /etc/skyview/config.json >/dev/null 2>&1 || true
+            chmod 640 /etc/skyview/config.json
         fi
         
+        # Enable and start the service
+        systemctl daemon-reload
+        systemctl enable skyview.service
         
-        # Handle systemd service
+        echo "SkyView has been installed and configured."
-        systemctl daemon-reload >/dev/null 2>&1 || true
+        echo "Edit /etc/skyview/config.json to configure your dump1090 sources."
-        
+        echo "Then run: systemctl start skyview"
-        # Check if service was previously enabled
-        if systemctl is-enabled skyview >/dev/null 2>&1; then
-            # Service was enabled, restart it
-            systemctl restart skyview >/dev/null 2>&1 || true
-        fi
         ;;
 esac
 

debian/usr/share/man/man1/beast-dump.1

@@ -1,4 +1,4 @@
-.TH BEAST-DUMP 1 "2025-08-24" "SkyView 0.0.2" "User Commands"
+.TH BEAST-DUMP 1 "2024-08-24" "SkyView 2.0.0" "User Commands"
 .SH NAME
 beast-dump \- Utility for analyzing raw ADS-B data in Beast binary format
 .SH SYNOPSIS
@@ -90,6 +90,6 @@ Beast format files typically use .bin or .beast extensions.
 .BR skyview (1),
 .BR dump1090 (1)
 .SH BUGS
-Report bugs at: https://kode.naiv.no/olemd/skyview/issues
+Report bugs at: https://github.com/skyview/skyview/issues
 .SH AUTHOR
-Ole-Morten Duesund <glemt.net>
+SkyView Team <admin@skyview.local>

debian/usr/share/man/man1/skyview.1

@@ -1,4 +1,4 @@
-.TH SKYVIEW 1 "2025-08-24" "SkyView 0.0.2" "User Commands"
+.TH SKYVIEW 1 "2024-08-24" "SkyView 2.0.0" "User Commands"
 .SH NAME
 skyview \- Multi-source ADS-B aircraft tracker with Beast format support
 .SH SYNOPSIS
@@ -83,6 +83,6 @@ Coverage heatmaps and range circles
 .BR beast-dump (1),
 .BR dump1090 (1)
 .SH BUGS
-Report bugs at: https://kode.naiv.no/olemd/skyview/issues
+Report bugs at: https://github.com/skyview/skyview/issues
 .SH AUTHOR
-Ole-Morten Duesund <glemt.net>
+SkyView Team <admin@skyview.local>

internal/merger/merger.go

@@ -22,7 +22,6 @@ package merger
 import (
 	"encoding/json"
 	"fmt"
-	"log"
 	"math"
 	"sync"
 	"time"
@@ -34,31 +33,8 @@ import (
 const (
 	// MaxDistance represents an infinite distance for initialization
 	MaxDistance = float64(999999)
-
-	// Position validation constants
-	MaxSpeedKnots        = 2000.0 // Maximum plausible aircraft speed (roughly Mach 3 at cruise altitude)
-	MaxDistanceNautMiles = 500.0  // Maximum position jump distance in nautical miles
-	MaxAltitudeFeet      = 60000  // Maximum altitude in feet (commercial ceiling ~FL600)
-	MinAltitudeFeet      = -500   // Minimum altitude (below sea level but allow for dead sea, etc.)
-
-	// Earth coordinate bounds
-	MinLatitude  = -90.0
-	MaxLatitude  = 90.0
-	MinLongitude = -180.0
-	MaxLongitude = 180.0
-
-	// Conversion factors
-	KnotsToKmh = 1.852
-	NmToKm     = 1.852
 )
 
-// ValidationResult represents the result of position validation checks.
-type ValidationResult struct {
-	Valid    bool     // Whether the position passed all validation checks
-	Errors   []string // List of validation failures for debugging
-	Warnings []string // List of potential issues (not blocking)
-}
-
 // Source represents a data source (dump1090 receiver or similar ADS-B source).
 // It contains both static configuration and dynamic status information used
 // for data fusion decisions and source monitoring.
@@ -132,9 +108,6 @@ func (a *AircraftState) MarshalJSON() ([]byte, error) {
 		NACp             uint8   `json:"NACp"`
 		NACv             uint8   `json:"NACv"`
 		SIL              uint8   `json:"SIL"`
-		TransponderCapability string  `json:"TransponderCapability"`
-		TransponderLevel      uint8   `json:"TransponderLevel"`
-		SignalQuality         string  `json:"SignalQuality"`
 		SelectedAltitude int     `json:"SelectedAltitude"`
 		SelectedHeading  float64 `json:"SelectedHeading"`
 		BaroSetting      float64 `json:"BaroSetting"`
@@ -179,9 +152,6 @@ func (a *AircraftState) MarshalJSON() ([]byte, error) {
 		NACp:             a.Aircraft.NACp,
 		NACv:             a.Aircraft.NACv,
 		SIL:              a.Aircraft.SIL,
-		TransponderCapability: a.Aircraft.TransponderCapability,
-		TransponderLevel:      a.Aircraft.TransponderLevel,
-		SignalQuality:         a.Aircraft.SignalQuality,
 		SelectedAltitude: a.Aircraft.SelectedAltitude,
 		SelectedHeading:  a.Aircraft.SelectedHeading,
 		BaroSetting:      a.Aircraft.BaroSetting,
@@ -447,19 +417,8 @@ func (m *Merger) UpdateAircraft(sourceID string, aircraft *modes.Aircraft, signa
 //   - sourceID: Identifier of source providing new data
 //   - timestamp: Timestamp of new data
 func (m *Merger) mergeAircraftData(state *AircraftState, new *modes.Aircraft, sourceID string, timestamp time.Time) {
-	// Position - use source with best signal or most recent, but validate first
+	// Position - use source with best signal or most recent
 	if new.Latitude != 0 && new.Longitude != 0 {
-		// Always validate position before considering update
-		validation := m.validatePosition(new, state, timestamp)
-
-		if !validation.Valid {
-			// Log validation errors and skip position update
-			icaoHex := fmt.Sprintf("%06X", new.ICAO24)
-			for _, err := range validation.Errors {
-				log.Printf("[POSITION_VALIDATION] ICAO %s: REJECTED position update - %s", icaoHex, err)
-			}
-		} else {
-			// Position is valid, proceed with normal logic
 		updatePosition := false
 
 		if state.Latitude == 0 {
@@ -483,13 +442,6 @@ func (m *Merger) mergeAircraftData(state *AircraftState, new *modes.Aircraft, so
 		}
 	}
 
-		// Log warnings even if position is valid
-		for _, warning := range validation.Warnings {
-			icaoHex := fmt.Sprintf("%06X", new.ICAO24)
-			log.Printf("[POSITION_VALIDATION] ICAO %s: WARNING - %s", icaoHex, warning)
-		}
-	}
-
 	// Altitude - use most recent
 	if new.Altitude != 0 {
 		state.Altitude = new.Altitude
@@ -557,27 +509,6 @@ func (m *Merger) mergeAircraftData(state *AircraftState, new *modes.Aircraft, so
 	if new.BaroSetting != 0 {
 		state.BaroSetting = new.BaroSetting
 	}
-
-	// Transponder information - use most recent non-empty
-	if new.TransponderCapability != "" {
-		state.TransponderCapability = new.TransponderCapability
-	}
-	if new.TransponderLevel > 0 {
-		state.TransponderLevel = new.TransponderLevel
-	}
-	
-	// Signal quality - use most recent non-empty (prefer higher quality assessments)
-	if new.SignalQuality != "" {
-		// Simple quality ordering: Excellent > Good > Fair > Poor
-		shouldUpdate := state.SignalQuality == "" ||
-			(new.SignalQuality == "Excellent") ||
-			(new.SignalQuality == "Good" && state.SignalQuality != "Excellent") ||
-			(new.SignalQuality == "Fair" && state.SignalQuality == "Poor")
-		
-		if shouldUpdate {
-			state.SignalQuality = new.SignalQuality
-		}
-	}
 }
 
 // updateHistories adds data points to historical tracking arrays.
@@ -599,31 +530,14 @@ func (m *Merger) mergeAircraftData(state *AircraftState, new *modes.Aircraft, so
 //   - signal: Signal strength measurement
 //   - timestamp: When this data was received
 func (m *Merger) updateHistories(state *AircraftState, aircraft *modes.Aircraft, sourceID string, signal float64, timestamp time.Time) {
-	// Position history with validation
+	// Position history
 	if aircraft.Latitude != 0 && aircraft.Longitude != 0 {
-		// Validate position before adding to history
-		validation := m.validatePosition(aircraft, state, timestamp)
-
-		if validation.Valid {
 		state.PositionHistory = append(state.PositionHistory, PositionPoint{
 			Time:      timestamp,
 			Latitude:  aircraft.Latitude,
 			Longitude: aircraft.Longitude,
 			Source:    sourceID,
 		})
-		} else {
-			// Log validation errors for debugging
-			icaoHex := fmt.Sprintf("%06X", aircraft.ICAO24)
-			for _, err := range validation.Errors {
-				log.Printf("[POSITION_VALIDATION] ICAO %s: REJECTED - %s", icaoHex, err)
-			}
-		}
-
-		// Log warnings even for valid positions
-		for _, warning := range validation.Warnings {
-			icaoHex := fmt.Sprintf("%06X", aircraft.ICAO24)
-			log.Printf("[POSITION_VALIDATION] ICAO %s: WARNING - %s", icaoHex, warning)
-		}
 	}
 
 	// Signal history
@@ -895,130 +809,6 @@ func calculateDistanceBearing(lat1, lon1, lat2, lon2 float64) (float64, float64)
 	return distance, bearing
 }
 
-// validatePosition performs comprehensive validation of aircraft position data to filter out
-// obviously incorrect flight paths and implausible position updates.
-//
-// This function implements multiple validation checks to improve data quality:
-//
-// 1. **Coordinate Validation**: Ensures latitude/longitude are within Earth's bounds
-// 2. **Altitude Validation**: Rejects impossible altitudes (negative or > FL600)
-// 3. **Speed Validation**: Calculates implied speed and rejects >Mach 3 movements
-// 4. **Distance Validation**: Rejects position jumps >500nm without time justification
-// 5. **Time Validation**: Ensures timestamps are chronologically consistent
-//
-// Parameters:
-//   - aircraft: New aircraft position data to validate
-//   - state: Current aircraft state with position history
-//   - timestamp: Timestamp of the new position data
-//
-// Returns:
-//   - ValidationResult with valid flag and detailed error/warning messages
-func (m *Merger) validatePosition(aircraft *modes.Aircraft, state *AircraftState, timestamp time.Time) *ValidationResult {
-	result := &ValidationResult{
-		Valid:    true,
-		Errors:   make([]string, 0),
-		Warnings: make([]string, 0),
-	}
-
-	// Skip validation if no position data
-	if aircraft.Latitude == 0 && aircraft.Longitude == 0 {
-		return result // No position to validate
-	}
-
-	// 1. Geographic coordinate validation
-	if aircraft.Latitude < MinLatitude || aircraft.Latitude > MaxLatitude {
-		result.Valid = false
-		result.Errors = append(result.Errors, fmt.Sprintf("Invalid latitude: %.6f (must be between %.1f and %.1f)",
-			aircraft.Latitude, MinLatitude, MaxLatitude))
-	}
-
-	if aircraft.Longitude < MinLongitude || aircraft.Longitude > MaxLongitude {
-		result.Valid = false
-		result.Errors = append(result.Errors, fmt.Sprintf("Invalid longitude: %.6f (must be between %.1f and %.1f)",
-			aircraft.Longitude, MinLongitude, MaxLongitude))
-	}
-
-	// 2. Altitude validation
-	if aircraft.Altitude != 0 { // Only validate non-zero altitudes
-		if aircraft.Altitude < MinAltitudeFeet {
-			result.Valid = false
-			result.Errors = append(result.Errors, fmt.Sprintf("Impossible altitude: %d feet (below minimum %d)",
-				aircraft.Altitude, MinAltitudeFeet))
-		}
-
-		if aircraft.Altitude > MaxAltitudeFeet {
-			result.Valid = false
-			result.Errors = append(result.Errors, fmt.Sprintf("Impossible altitude: %d feet (above maximum %d)",
-				aircraft.Altitude, MaxAltitudeFeet))
-		}
-	}
-
-	// 3. Speed and distance validation (requires position history)
-	if len(state.PositionHistory) > 0 && state.Latitude != 0 && state.Longitude != 0 {
-		lastPos := state.PositionHistory[len(state.PositionHistory)-1]
-
-		// Calculate distance between positions
-		distance, _ := calculateDistanceBearing(lastPos.Latitude, lastPos.Longitude,
-			aircraft.Latitude, aircraft.Longitude)
-
-		// Calculate time difference
-		timeDiff := timestamp.Sub(lastPos.Time).Seconds()
-
-		if timeDiff > 0 {
-			// Calculate implied speed in knots
-			distanceNm := distance / NmToKm
-			speedKnots := (distanceNm / timeDiff) * 3600 // Convert to knots per hour
-
-			// Distance validation: reject jumps >500nm
-			if distanceNm > MaxDistanceNautMiles {
-				result.Valid = false
-				result.Errors = append(result.Errors, fmt.Sprintf("Impossible position jump: %.1f nm in %.1f seconds (max allowed: %.1f nm)",
-					distanceNm, timeDiff, MaxDistanceNautMiles))
-			}
-
-			// Speed validation: reject >2000 knots (roughly Mach 3)
-			if speedKnots > MaxSpeedKnots {
-				result.Valid = false
-				result.Errors = append(result.Errors, fmt.Sprintf("Impossible speed: %.0f knots (max allowed: %.0f knots)",
-					speedKnots, MaxSpeedKnots))
-			}
-
-			// Warning for high but possible speeds (>800 knots)
-			if speedKnots > 800 && speedKnots <= MaxSpeedKnots {
-				result.Warnings = append(result.Warnings, fmt.Sprintf("High speed detected: %.0f knots", speedKnots))
-			}
-		} else if timeDiff < 0 {
-			// 4. Time validation: reject out-of-order timestamps
-			result.Valid = false
-			result.Errors = append(result.Errors, fmt.Sprintf("Out-of-order timestamp: %.1f seconds in the past", -timeDiff))
-		}
-	}
-
-	// 5. Aircraft-specific validations based on reported speed vs. position
-	if aircraft.GroundSpeed > 0 && len(state.PositionHistory) > 0 {
-		// Check if reported ground speed is consistent with position changes
-		lastPos := state.PositionHistory[len(state.PositionHistory)-1]
-		distance, _ := calculateDistanceBearing(lastPos.Latitude, lastPos.Longitude,
-			aircraft.Latitude, aircraft.Longitude)
-		timeDiff := timestamp.Sub(lastPos.Time).Seconds()
-
-		if timeDiff > 0 {
-			distanceNm := distance / NmToKm
-			impliedSpeed := (distanceNm / timeDiff) * 3600
-			reportedSpeed := float64(aircraft.GroundSpeed)
-
-			// Warning if speeds differ significantly (>100 knots difference)
-			if math.Abs(impliedSpeed-reportedSpeed) > 100 && reportedSpeed > 50 {
-				result.Warnings = append(result.Warnings,
-					fmt.Sprintf("Speed inconsistency: reported %d knots, implied %.0f knots",
-						aircraft.GroundSpeed, impliedSpeed))
-			}
-		}
-	}
-
-	return result
-}
-
 // Close closes the merger and releases resources
 func (m *Merger) Close() error {
 	m.mu.Lock()

internal/modes/decoder.go

@@ -138,13 +138,6 @@ type Aircraft struct {
 	NACv             uint8   // Navigation Accuracy Category - Velocity (0-4)
 	SIL              uint8   // Surveillance Integrity Level (0-3)
 	
-	// Transponder Information
-	TransponderCapability string // Transponder capability level (from DF11 messages)
-	TransponderLevel      uint8  // Transponder level (0-7 from capability field)
-
-	// Combined Data Quality Assessment
-	SignalQuality string // Combined assessment of position/velocity accuracy and integrity
-
 	// Autopilot/Flight Management
 	SelectedAltitude int     // MCP/FCU selected altitude in feet
 	SelectedHeading  float64 // MCP/FCU selected heading in degrees
@@ -238,32 +231,14 @@ func (d *Decoder) Decode(data []byte) (*Aircraft, error) {
 	}
 
 	switch df {
-	case DF0:
-		// Short Air-Air Surveillance (ACAS)
-		aircraft.Altitude = d.decodeAltitude(data)
 	case DF4, DF20:
 		aircraft.Altitude = d.decodeAltitude(data)
 	case DF5, DF21:
 		aircraft.Squawk = d.decodeSquawk(data)
-	case DF11:
-		// All-Call Reply - extract capability and interrogator identifier
-		d.decodeAllCallReply(data, aircraft)
-	case DF16:
-		// Long Air-Air Surveillance (ACAS with altitude)
-		aircraft.Altitude = d.decodeAltitude(data)
 	case DF17, DF18:
 		return d.decodeExtendedSquitter(data, aircraft)
-	case DF19:
-		// Military Extended Squitter - similar to DF17/18 but with military codes
-		return d.decodeMilitaryExtendedSquitter(data, aircraft)
-	case DF24:
-		// Comm-D Enhanced Length Message - variable length data
-		d.decodeCommD(data, aircraft)
 	}
 
-	// Always try to calculate signal quality at the end of decoding
-	d.calculateSignalQuality(aircraft)
-
 	return aircraft, nil
 }
 
@@ -336,12 +311,6 @@ func (d *Decoder) decodeExtendedSquitter(data []byte, aircraft *Aircraft) (*Airc
 		d.decodeOperationalStatus(data, aircraft)
 	}
 
-	// Set baseline signal quality for ADS-B extended squitter
-	aircraft.SignalQuality = "Good" // ADS-B extended squitter is high quality by default
-	
-	// Refine quality based on NACp/NACv/SIL if available
-	d.calculateSignalQuality(aircraft)
-
 	return aircraft, nil
 }
 
@@ -434,20 +403,8 @@ func (d *Decoder) decodeAirbornePosition(data []byte, aircraft *Aircraft) {
 	}
 	d.mu.Unlock()
 
-	// Extract NACp (Navigation Accuracy Category for Position) from position messages
-	// NACp is embedded in airborne position messages in bits 50-53 (data[6] bits 1-4)
-	if tc >= 9 && tc <= 18 {
-		// For airborne position messages TC 9-18, NACp is encoded in the message
-		aircraft.NACp = uint8(tc - 8) // TC 9->NACp 1, TC 10->NACp 2, etc.
-		// Note: This is a simplified mapping. Real NACp extraction is more complex
-		// but this provides useful position accuracy indication
-	}
-
 	// Try to decode position if we have both even and odd messages
 	d.decodeCPRPosition(aircraft)
-	
-	// Calculate signal quality whenever we have position data
-	d.calculateSignalQuality(aircraft)
 }
 
 // decodeCPRPosition performs CPR (Compact Position Reporting) global position decoding.
@@ -892,9 +849,6 @@ func (d *Decoder) decodeOperationalStatus(data []byte, aircraft *Aircraft) {
 	aircraft.NACp = (data[7] >> 4) & 0x0F
 	aircraft.NACv = data[7] & 0x0F
 	aircraft.SIL = (data[8] >> 6) & 0x03
-
-	// Calculate combined signal quality from NACp, NACv, and SIL
-	d.calculateSignalQuality(aircraft)
 }
 
 // decodeSurfacePosition extracts position and movement data for aircraft on the ground.
@@ -986,164 +940,3 @@ func (d *Decoder) decodeGroundSpeed(movement uint8) float64 {
 	}
 	return 0
 }
-
-// decodeAllCallReply extracts capability and interrogator identifier from DF11 messages.
-//
-// DF11 All-Call Reply messages contain:
-//   - Capability (CA) field (3 bits): transponder capabilities and modes
-//   - Interrogator Identifier (II) field (4 bits): which radar interrogated
-//   - ICAO24 address (24 bits): aircraft identifier
-//
-// The capability field indicates transponder features and operational modes:
-//   - 0: Level 1 transponder
-//   - 1: Level 2 transponder
-//   - 2: Level 2+ transponder with additional capabilities
-//   - 3: Level 2+ transponder with enhanced surveillance
-//   - 4: Level 2+ transponder with enhanced surveillance and extended squitter
-//   - 5: Level 2+ transponder with enhanced surveillance, extended squitter, and enhanced surveillance capability
-//   - 6: Level 2+ transponder with enhanced surveillance, extended squitter, and enhanced surveillance capability
-//   - 7: Level 2+ transponder, downlink request value is 0, or the flight status is alert, SPI, or emergency
-//
-// Parameters:
-//   - data: 7-byte DF11 message
-//   - aircraft: Aircraft struct to populate
-func (d *Decoder) decodeAllCallReply(data []byte, aircraft *Aircraft) {
-	if len(data) < 7 {
-		return
-	}
-
-	// Extract Capability (CA) - bits 6-8 of first byte
-	capability := (data[0] >> 0) & 0x07
-
-	// Extract Interrogator Identifier (II) - would be in control field if present
-	// For DF11, this information is typically implied by the interrogating radar
-
-	// Store transponder capability information in dedicated fields
-	aircraft.TransponderLevel = capability
-	switch capability {
-	case 0:
-		aircraft.TransponderCapability = "Level 1"
-	case 1:
-		aircraft.TransponderCapability = "Level 2"
-	case 2, 3:
-		aircraft.TransponderCapability = "Level 2+"
-	case 4, 5, 6:
-		aircraft.TransponderCapability = "Enhanced"
-	case 7:
-		aircraft.TransponderCapability = "Alert/Emergency"
-	}
-}
-
-// decodeMilitaryExtendedSquitter processes DF19 military extended squitter messages.
-//
-// DF19 messages have the same structure as DF17/18 ADS-B extended squitter but
-// may contain military-specific type codes or enhanced data formats.
-// This implementation treats them similarly to civilian extended squitter
-// but could be extended for military-specific capabilities.
-//
-// Parameters:
-//   - data: 14-byte DF19 message
-//   - aircraft: Aircraft struct to populate
-//
-// Returns updated Aircraft struct or error for malformed messages.
-func (d *Decoder) decodeMilitaryExtendedSquitter(data []byte, aircraft *Aircraft) (*Aircraft, error) {
-	if len(data) != 14 {
-		return nil, fmt.Errorf("invalid military extended squitter length: %d bytes", len(data))
-	}
-
-	// For now, treat military extended squitter similar to civilian
-	// Could be enhanced to handle military-specific type codes
-	return d.decodeExtendedSquitter(data, aircraft)
-}
-
-// decodeCommD extracts data from DF24 Comm-D Enhanced Length Messages.
-//
-// DF24 messages are variable-length data link communications that can contain:
-//   - Weather information and updates
-//   - Flight plan modifications
-//   - Controller-pilot data link messages
-//   - Air traffic management information
-//   - Future air navigation system data
-//
-// Due to the complexity and variety of DF24 message content, this implementation
-// provides basic structure extraction. Full decoding would require extensive
-// knowledge of specific data link protocols and message formats.
-//
-// Parameters:
-//   - data: Variable-length DF24 message (minimum 7 bytes)
-//   - aircraft: Aircraft struct to populate
-func (d *Decoder) decodeCommD(data []byte, aircraft *Aircraft) {
-	if len(data) < 7 {
-		return
-	}
-
-	// DF24 messages contain variable data that would require protocol-specific decoding
-	// For now, we note that this is a data communication message but don't overwrite aircraft category
-	// Could set a separate field for message type if needed in the future
-
-	// The actual message content would require:
-	// - Protocol identifier extraction
-	// - Message type determination
-	// - Format-specific field extraction
-	// - Possible message reassembly for multi-part messages
-	//
-	// This could be extended based on specific requirements and available documentation
-}
-
-// calculateSignalQuality combines NACp, NACv, and SIL into an overall data quality assessment.
-//
-// This function provides a human-readable quality indicator that considers:
-//   - Position accuracy (NACp): How precise the aircraft's position data is
-//   - Velocity accuracy (NACv): How precise the speed/heading data is
-//   - Surveillance integrity (SIL): How reliable/trustworthy the data is
-//
-// The algorithm prioritizes integrity first (SIL), then position accuracy (NACp),
-// then velocity accuracy (NACv) to provide a meaningful overall assessment.
-//
-// Quality levels:
-//   - "Excellent": High integrity with very precise position/velocity
-//   - "Good": Good integrity with reasonable precision
-//   - "Fair": Moderate quality suitable for tracking
-//   - "Poor": Low quality but still usable
-//   - "Unknown": No quality indicators available
-//
-// Parameters:
-//   - aircraft: Aircraft struct containing NACp, NACv, and SIL values
-func (d *Decoder) calculateSignalQuality(aircraft *Aircraft) {
-	nacp := aircraft.NACp
-	nacv := aircraft.NACv
-	sil := aircraft.SIL
-
-	// If no quality indicators are available, don't set anything
-	if nacp == 0 && nacv == 0 && sil == 0 {
-		// Don't overwrite existing quality assessment
-		return
-	}
-
-	// Excellent: High integrity with high accuracy OR very high accuracy alone
-	if (sil >= 2 && nacp >= 9) || nacp >= 10 {
-		aircraft.SignalQuality = "Excellent"
-		return
-	}
-
-	// Good: Good integrity with moderate accuracy OR high accuracy alone
-	if (sil >= 2 && nacp >= 6) || (sil >= 1 && nacp >= 9) || nacp >= 8 {
-		aircraft.SignalQuality = "Good"
-		return
-	}
-
-	// Fair: Some integrity with basic accuracy OR moderate accuracy alone
-	if (sil >= 1 && nacp >= 3) || nacp >= 5 {
-		aircraft.SignalQuality = "Fair"
-		return
-	}
-
-	// Poor: Low but usable quality indicators
-	if sil > 0 || nacp >= 1 || nacv > 0 {
-		aircraft.SignalQuality = "Poor"
-		return
-	}
-
-	// Default fallback
-	aircraft.SignalQuality = ""
-}

internal/server/server.go

@@ -22,7 +22,6 @@ import (
 	"net/http"
 	"path"
 	"strconv"
-	"strings"
 	"sync"
 	"time"
 
@@ -52,7 +51,6 @@ type OriginConfig struct {
 //   - Concurrent broadcast system for WebSocket clients
 //   - CORS support for cross-origin web applications
 type Server struct {
-	host        string         // Bind address for HTTP server
 	port        int                // TCP port for HTTP server
 	merger      *merger.Merger     // Data source for aircraft information
 	staticFiles embed.FS          // Embedded static web assets
@@ -87,7 +85,7 @@ type AircraftUpdate struct {
 	Stats    map[string]interface{}           `json:"stats"`    // System statistics and metrics
 }
 
-// NewWebServer creates a new HTTP server instance for serving the SkyView web interface.
+// NewServer creates a new HTTP server instance for serving the SkyView web interface.
 //
 // The server is configured with:
 //   - WebSocket upgrader allowing all origins (suitable for development)
@@ -95,16 +93,14 @@ type AircraftUpdate struct {
 //   - Read/Write buffers optimized for aircraft data messages
 //
 // Parameters:
-//   - host: Bind address (empty for all interfaces, "localhost" for local only)
 //   - port: TCP port number for the HTTP server
 //   - merger: Data merger instance providing aircraft information
 //   - staticFiles: Embedded filesystem containing web assets
 //   - origin: Geographic reference point for the map interface
 //
 // Returns a configured but not yet started server instance.
-func NewWebServer(host string, port int, merger *merger.Merger, staticFiles embed.FS, origin OriginConfig) *Server {
+func NewServer(port int, merger *merger.Merger, staticFiles embed.FS, origin OriginConfig) *Server {
 	return &Server{
-		host:        host,
 		port:        port,
 		merger:      merger,
 		staticFiles: staticFiles,
@@ -143,15 +139,8 @@ func (s *Server) Start() error {
 	// Setup routes
 	router := s.setupRoutes()
 
-	// Format address correctly for IPv6
-	addr := fmt.Sprintf("%s:%d", s.host, s.port)
-	if strings.Contains(s.host, ":") {
-		// IPv6 address needs brackets
-		addr = fmt.Sprintf("[%s]:%d", s.host, s.port)
-	}
-
 	s.server = &http.Server{
-		Addr:    addr,
+		Addr:    fmt.Sprintf(":%d", s.port),
 		Handler: router,
 	}
 

old.json

@@ -0,0 +1,15 @@
+{
+  "server": {
+    "address": ":8080",
+    "port": 8080
+  },
+  "dump1090": {
+    "host": "svovel",
+    "data_port": 30003
+  },
+  "origin": {
+    "latitude": 59.908127,
+    "longitude": 10.801460,
+    "name": "Etterstadsletta flyplass"
+  }
+}

scripts/build-deb.sh

@@ -34,40 +34,25 @@ mkdir -p "$BUILD_DIR"
 # Change to project directory
 cd "$PROJECT_DIR"
 
-# Build the applications
+# Build the application
-echo_info "Building SkyView applications..."
+echo_info "Building SkyView application..."
 export CGO_ENABLED=0
 export GOOS=linux
 export GOARCH=amd64
 
-VERSION=$(git describe --tags --always --dirty)
+go build -ldflags="-w -s -X main.version=$(git describe --tags --always --dirty)" \
-LDFLAGS="-w -s -X main.version=$VERSION"
-
-# Build main skyview binary
-echo_info "Building skyview..."
-if ! go build -ldflags="$LDFLAGS" \
     -o "$DEB_DIR/usr/bin/skyview" \
-    ./cmd/skyview; then
+    ./cmd/skyview
-    echo_error "Failed to build skyview"
+
+if [ $? -ne 0 ]; then
+    echo_error "Failed to build application"
     exit 1
 fi
 
-# Build beast-dump utility
+echo_info "Built binary: $(file "$DEB_DIR/usr/bin/skyview")"
-echo_info "Building beast-dump..."
-if ! go build -ldflags="$LDFLAGS" \
-    -o "$DEB_DIR/usr/bin/beast-dump" \
-    ./cmd/beast-dump; then
-    echo_error "Failed to build beast-dump"
-    exit 1
-fi
 
-echo_info "Built binaries:"
+# Set executable permission
-echo_info "  skyview: $(file "$DEB_DIR/usr/bin/skyview")"
-echo_info "  beast-dump: $(file "$DEB_DIR/usr/bin/beast-dump")"
-
-# Set executable permissions
 chmod +x "$DEB_DIR/usr/bin/skyview"
-chmod +x "$DEB_DIR/usr/bin/beast-dump"
 
 # Get package info
 VERSION=$(grep "Version:" "$DEB_DIR/DEBIAN/control" | cut -d' ' -f2)
@@ -84,7 +69,9 @@ sed -i "s/Installed-Size:.*/Installed-Size: $INSTALLED_SIZE/" "$DEB_DIR/DEBIAN/c
     echo "Installed-Size: $INSTALLED_SIZE" >> "$DEB_DIR/DEBIAN/control"
 
 # Build the package
-if dpkg-deb --root-owner-group --build "$DEB_DIR" "$BUILD_DIR/$DEB_FILE"; then
+dpkg-deb --build "$DEB_DIR" "$BUILD_DIR/$DEB_FILE"
+
+if [ $? -eq 0 ]; then
     echo_info "Successfully created: $BUILD_DIR/$DEB_FILE"
     
     # Show package info